- Get link
- X
- Other Apps
Final test firing of reusable solid rocket motor FSM-17 on Feb. 25 in Promontory, Utah. Image Credit: NASA
Smoke curls into the Utah skies as FSM-17 completes its successful test firing. Image Credit: NASA
Flight Support Motor-17, the final solid rocket ground test motor of the Space Shuttle program. Image Credit: ATK
Mist surrounds Flight Support Motor-17 prior to a successful test on Feb. 25 in Promontory, Utah. Image Credit: NASA
The flight support motor, or FSM-17, burned for approximately 123 seconds -- the same time each reusable solid rocket motor burns during an actual space shuttle launch. Preliminary indications show all test objectives were met. After final test data are analyzed, results for each objective will be published in a NASA report.
ATK Launch Systems, a unit of Alliant Techsystems Inc., in Promontory, north of Salt Lake City, manufactures and tests the solid rocket motors.
The test -- the 52nd conducted for NASA by ATK – marks the closure of a test program that has spanned more than three decades. The first test was in July 1977. The ATK-built motors have successfully launched the space shuttle into orbit 129 times.
"Today's test was a great deal more than the successful conclusion to a series of highly successful NASA/ATK-sponsored static tests that began more than three decades ago," said David Beaman, Reusable Solid Rocket Booster project manager at NASA's Marshall Space Flight Center in Huntsville, Ala. The project, part of the Space Shuttle Propulsion Office, is responsible for motor design, development, manufacturing, assembly, testing and flight performance.
"These tests have built a base of engineering knowledge that continued engineering development of the reusable solid rocket motor system and the continued safe and successful launch of space shuttles," Beaman said. "They have provided an engineering model and lessons learned for additional applications in future launch systems."
The final test was conducted to ensure the safe flight of the four remaining space shuttle missions. A total of 43 design objectives were measured through 258 instrument channels during the two-minute static firing. The flight motor tested represents motors that will be used for all remaining space shuttle launches.
The space shuttle's reusable solid rocket motor is the largest solid rocket motor ever flown, the only one rated for human flight and the first designed for reuse. Each shuttle launch requires the boost of two reusable solid rocket motors to lift the 4.5-million-pound shuttle vehicle.
During space shuttle flights, solid rocket motors provide 80 percent of the thrust during the first two minutes of flight. Each motor, the primary component of the shuttle's twin solid rocket boosters, generates an average thrust of 2.6 million pounds and is just over 126 feet long and 12 feet in diameter.
For more information about the Space Shuttle Program, visit:
Comments